A seized lock, dropped door, misted glass or stiff bifold does not always mean the whole unit needs replacing. In many cases, the problem comes down to one worn or failed part.
We inspect the frame, glass and hardware to find the fault, then explain the best way to put it right. If a repair makes sense, that is what we'll recommend. If the unit is beyond repair, we'll explain why and talk you through the replacement options.
If a window or door is difficult to open, no longer closes properly or has started letting in draughts, we can inspect the problem and repair or adjust the parts causing it.
Where possible, we'll get the existing window or door working as it should without replacing the whole unit.
Faulty locks, handles and hinges can make windows and doors difficult to use and affect security. We can repair, adjust or replace the damaged parts to get everything opening, closing and locking as it should.
If the frame itself is still in good condition, there is often no need to replace the whole window or door.
We replace broken, cracked and misted glass, as well as failed sealed units. If the existing frame is still in good condition, the glass can often be replaced on its own without changing the whole window or door.
We can also supply different glazing types where a stronger or more suitable specification is needed.
Patio, bifold and sliding doors rely on rollers, tracks, seals and locking hardware to move smoothly. If a door has become stiff, noisy, difficult to close or no longer lines up properly, we can inspect the fault and repair or adjust the parts causing the problem.
We fit cat flaps into suitable uPVC, composite and timber doors, as well as glazed doors and panels. If the flap needs to go into glass, the existing sealed unit is replaced with a new one made to accommodate it.
We'll check the door first and advise on the most suitable fitting option.
Regular maintenance can help keep windows and doors working smoothly and pick up smaller issues before they develop into more expensive repairs. It's useful if something feels stiff, starts letting in a draught or simply hasn't been checked for a while.
Whether it's a door that won't lock, misted glass or a stiff bifold, just tell us what's happening and we'll take it from there.
We'll check the window or door, find the cause of the fault and let you know whether it can be repaired.
From locks, hinges and seals to rollers, glazing and alignment, we repair or replace the parts that need attention.
Once the repair is complete, we check everything opens, closes and locks as it should, then leave the area clean and tidy.
FAQs
In many cases, yes. Problems with locks, handles, hinges, seals, glazing and alignment can often be repaired without replacing the whole window or door. We'll inspect the fault first and recommend a repair where it makes sense.
It depends on the condition of the frame, glass and hardware. If the main unit is still sound, a repair or replacement part may be all that's needed. If it's badly damaged or no longer worth repairing, we'll explain why and talk you through the replacement options.
Yes. This is often caused by worn hinges, damaged hardware or the window or door becoming misaligned over time. We can inspect the problem, adjust the unit and replace worn parts where needed.
Yes. Misting between the panes usually means the sealed unit has failed. In many cases, the glass unit can be replaced while keeping the existing frame.
Yes. We repair patio, bifold and sliding doors, including problems with rollers, tracks, locks, handles, seals and alignment. If the door is stiff, sticking or not moving properly, we can usually identify the cause and put it right.
Yes. We can carry out general servicing and maintenance, including adjustments, lubrication of moving parts, checking seals and clearing drainage channels. Regular maintenance can help keep windows and doors working smoothly and prevent smaller faults from becoming bigger problems.